White low-slope membrane roof on a two-story stucco building with a metal parapet cap and palm trees below

Coral Springs, Florida

Flat Roofing in Coral Springs, Florida

A flat roof has to move water without help from gravity. Drains, seams and edges decide whether it stays dry, and each one is a place where a roof can fail.

  • Membrane roofs
  • Townhomes and condos
  • Small commercial
State certifiedCCC1337306 · CBC1266379
Coral Springs, FLNorth Broward roofing
$0 down financingThe monthly payment for a 15-year home improvement installment loan of $10,000 with an APR of 10.99% would be $113. No down payment required. Not all loan products will be available to all partners or all consumers.Subject to lender approval
We file your permitUnder state licenses

Overview

Low-slope roofs on shared and commercial buildings

Flat roofs in north Broward cover townhome rows, condominium buildings and small commercial buildings, and the porches and additions of single-family houses. Membrane systems such as single-ply and modified bitumen are installed in layers and rely on welded or sealed seams.

Standing water, called ponding, is the signal to watch. It means that the slope or the drains are not moving water, and it speeds the aging of the membrane.

Aerial view of a suburb of tile and flat-roofed buildings among palm trees and lakes

Why us

What USA Roofing Coral Springs brings to the job

Approved membrane systems

Membranes and attachment follow an approval for the zone and are listed on the permit.

Drainage looked at

We examine drains, scuppers and slope, because ponding is the first sign of trouble.

Plans for associations

Scopes are written by building for owners, managers and boards.

Edges and penetrations

Parapet caps, curbs and vents are flashed so the seams are not left to caulk.

What goes wrong with flat roofs

Because flat roofs depend on their seams and drains, problems cluster in the same places.

  • Ponding water where the roof slope is too shallow.
  • Seams that have opened after years of heat cycles.
  • Blocked drains and scuppers.
  • Cracked flashing at parapets and rooftop equipment curbs.
  • Membrane blisters from trapped moisture.
Roof deck with new plywood and white and gray membrane being rolled out

Planning a flat roof job

A low-slope re-roof is planned in sections so that the building is never left open to rain.

  • Inspection with photographs, and moisture checks where needed.
  • A written scope with the membrane's approval and the warranty terms.
  • Permit and owner or board approval before work.
  • Sections opened and closed the same day.
  • Final inspection and a record of the work.
Two-story stucco home with a new gray tile roof, paver driveway and tropical plantings in morning light
$0down payment

Roof financing

Paying for a roof without draining your savings

Approved applicants can finance a roof with nothing down. The lender puts its terms in writing for you before you commit to anything.

  • $0 down on approved credit
  • Lender terms given in writing
  • Roofing estimate comes first

Questions

Flat Roofing: what people ask us

Can a flat roof be coated instead of replaced?

Sometimes, when the existing roof is still sound and dry. A coating over a wet or failed roof traps the moisture inside, so we check the roof first and tell you honestly whether a coating or a new membrane is the right step.

Why does my flat roof hold water after rain?

Either the slope is too low or the drains are not working. A short ponding period is normal, but water that stays for days needs attention.

Do flat roofs need a permit?

Re-roofs generally do. The product approval and the attachment method are listed on the application, and the city inspects the work, so the permit is part of what you pay a licensed contractor to handle for you.

Do you work on small commercial roofs?

Yes. We write the scope for owners and managers, with the product approvals, the access plan and the sequence of sections, so a small commercial building is never left open to rain overnight while the work is under way.

Service area

Roofing around Coral Springs

Our crew works in Coral Springs and the cities within about ten miles of it. Open your city's page for local roof notes, or phone us if your street is not named.

Estimate

Get your flat roof inspected

Give us the address and a few words about what is wrong. We call back to book an inspection, then put the estimate in writing, with financing alongside it only if you ask.

Request an estimate

Online requests are accepted 24 hours a day.

Optional, but the more you share, the better the estimate.

Call NowEstimate